Linking your Zebra printer to Andy

This article takes you through all the steps required to link the Zebra printer to Andy with an Android and iOS device.

Hold on! Before linking your printer, please read this article to check which printers are approved for labelling with Andy.

Activating your Zebra Printer's Bluetooth mode

To configure the printer for the first time with Andy (either via Bluetooth or WiFi), follow this step:

Ensure that the iOS or Android device is Bluetooth enabled.
Access Settings > Bluetooth on the device and pair the printer.

Note that the printer can only be linked to one device at a time. If you have difficulties pairing it, please ensure that it is not paired with other devices by temporarily deactivating your Bluetooth connection.

Configuring your Zebra Printer via WIFI

Is your Wifi connection good?

Then, we recommend printing via WiFi for faster performance.

Follow these steps:

From Andy > Settings > Printers, select a current configuration, or choose "Add Printer."

Select your printer's model.
Choose Wi-Fi as printing method.
Select the printer from the list of devices.

If the printer does not appear on the list, review the "Pair Printer" section.

Enter the network name and password (ensure these are the ame as the connected device's network).
Provide an identification name for the printer and click Save.

The printer will restart. This could take up to one minute.

Pairing the Zebra Printer via BLUETOOTH

From Andy > Settings > Printers, select a current configuration, or choose "Add Printer."

Select your printer's model.
Choose Bluetooth as printing method.
Select the printer from the list of devices.

If the printer does not appear on the list, review the "Pair Printer" section.

Assign the printer a name and click on Save.

The printer should be linked within 5-10 seconds.

Selecting your Zebra Printer in Andy

After having configured your Zebra printer via WiFi and Bluetooth, you can choose your preferred printing method.

On the configured printer, click the button and Set as default.

Due to Bluetooth limitations on iOS, if you want to print from an Android device, you must deactivate the iOS device's Bluetooth in Settings > Bluetooth > Disable. If you want to print with iOS again, activate Bluetooth and you're ready to go.

Done! You have successfully connected the Zebra printer with Andy, and you can now start labelling!

If you need to calibrate the printer, refer to this article: How do I calibrate labels on Zebra printers?

🢀Accessing the Andy App with my user and PIN

Related Articles
Pairing the Brother TD-2125 Printer with Andy
The following steps will show you how to pair a Brother TD-2125dnwb printer with an Android device. Before starting the process, please read this article to find out which Printers are approved for labelling with Andy Activating the printer's ...
Andy App's Installation Guide
Welcome to Andy! This article will help you easily install Andy in your kitchen/s. Let's get started! STEPS TO FOLLOW 1. Installing the Andy App on your device. We recommend installing it from Google Play or from the App Store. However, there are ...
Linking your Dobbox sensors to Andy
Trying to link your Dobbox sensors to Andy from Android and iOS? You'll find all the information you need, below. Turning the devices ON 1. Turn on the sensors by holding down the button on the back of the sensor for a few seconds until the blue ...
Welcome to Andy!
We are thrilled to help your teams manage their food safety daily tasks! Please, refer to the Andy Installation Guide for more detailed instructions on getting Andy ready to guide your kitchen teams in guaranteeing the food safety of all their ...
Accessing the Andy App for the first time
To access your business' account, you first need to create your store manager’s credentials. To do so, simply access the app for the first time using the provided login credentials. This process creates a level 3 user with access to some of Andy’s ...