How do I calibrate labels on Zebra Printers?

If the Zebra printer had previously been used, you may need to calibrate it to ensure that the labels printed are properly aligned.

Simply follow these steps:

1. Open the cover and align the sensor. Both arrows should point towards each other.

2. Close the printer's cover and press the first (⏸️) and third (❌) buttons at the same time during 3-4 seconds.

And you're don! Your Zebra Printers should be calibrated and ready to go!

You may now be interested in Linking your Zebra printers to Andy

Related Articles
Troubleshooting printing errors on the Zebra printer
In this post we'll show you how to resolve any potential connection issues between the printer and the device used to print with Andy. To learn more about pairing the Zebra printer, please read this article. Resetting the Wi-Fi network on the Zebra ...
Printer error codes and how to troubleshoot them
ERROR CODE MEANING SOLUTION PRINTER ERRORS E-C01 Incompatible printer model Reconfigure the printer by selecting the appropriate printer model E-C02 Connection failure with the printer Make sure the printer is turned on Make sure Bluetooth is ...
My labels are printing incorrectly
At Andy, we are aware that labelling products is one of the most important tasks in your kitchen. That's why we go the extra mile to ensure that your labels are printed correctly and you can perform your tasks in the most effective possible way. If ...
Resetting your Brother printer's factory settings
Do you have issues printing with your Brother Pinter? In that case we recommend performing a series of basick checks according to the error message that appears on the Andy App. This article might help you identify the error codes, potential causes ...
My printed labels are not being saved
If you are printing labels and they are not being reflected in the Traceability label history in Andy, it is very likely that Andy is not connecting to the internet. Please note that an internet connection is required for labels to be displayed ...