Link Brother TD-2350 printer per network from the browser
Below is a step-by-step explanation of how to print with Andy over the network from the browser, specifically using Google Chrome.
Before starting the process, check this article about Printers approved for labeling with Andy.Enable network mode on the printer
First of all, make sure you have the printer connected via a network cable. Once connected, from the printer itself,
enable wired network mode by following these steps:
1. Press Menu.
2. Select Wired LAN:
3. Select TCP/IP Settings:
4. Select Auto or Static (depending on whether you want to set a fixed IP). If you select Auto, the assigned IP
can be checked under Menu > Wired LAN > Wired LAN Status.
Here it is important to write down the IP address shown, as you will need to enter it later in Andy
Install extension: Andy Printer Extension
To be able to print from the browser, first of all you must use Google Chrome and have
the Andy Printer Extension installed. To do so, click the following link:
Link the printer with Andy
Once the extension is installed and you access Andy, go to
Settings > Printer > Add printer and follow these steps:
1. Select your printer model
2. Select the printing method NETWORK
3. Enter the IP address assigned to the printer
4. Click Save configuration
Done! Your printer is now paired and ready to print over the network from the browser.
2. Select the printing method NETWORK
3. Enter the IP address assigned to the printer
4. Click Save configuration
Done! Your printer is now paired and ready to print over the network from the browser.
If you want to link it via Wi-Fi, you can find the instructions in this article: