Connecting your Brother printer to Andy using Wi-Fi

The following article outlines the process you need to follow to link your Brother printer to Andy using Wi-Fi on your Android and iOS device.

Before starting the connection process, please refer to this post to find out which printers are approved for labelling with Andy.

Activating Wi-Fi mode on the Brother printer

Check the printer itself to make sure the Wi-Fi mode is activated:

Press Menu
Then to select:
a. WLAN. Press OK.
b. On /Off. Press OK.
Press to select ON. Press OK.

Connecting the printer to your Wi-Fi network

Go to WLAN > Infra Manual:

a) Select your Wi-Fi or select "Other..." and enter the network name.
b) Enter your Wi-Fi password by navigating with and click OK (use the Menu button to switch between uppercase, lowercase, numbers, and symbols).

On the printer display, press Menu > WLAN > WLAN Status > Infrastructure Mode

You are looking for the IP Addr, as you will need to enter it into Andy later on (it should look something similar to 192.168.1.1)

Connecting the Brother printer to Andy

If this is your first time using Andy's Labelling Tool and had not previously configured it, you'll see the message "The printer is not yet configured". Click on "Go for it" and it will take you to the Printer Setup section.Once in Andy's main menu go to Settings > Printer and click on:

Select your printer: TD-4550DNWB

Select the Wi-Fi printing method

Enter the printer's IP Address in ANDY (you'll find it on the printer: Menu > WLAN > WLAN Status > Infrastructure Mode > IP Address)

Name the printer (opcional)
Click on Save

Your Brother printer is now connected to Andy and ready to start labelling!

🢀Accessing the Andy App with your user and PIN

Related Articles
Linking your Brother Printer/s to Andy
This article explains how to connect a Brother printer to an Android and iOS device. We'll first show you a one-minute video tutorial on how to connect the printer, and then, the steps involved. Before starting the process, please refer to this ...
Pairing the Brother TD-2125 Printer with Andy
The following steps will show you how to pair a Brother TD-2125dnwb printer with an Android device. Before starting the process, please read this article to find out which Printers are approved for labelling with Andy Activating the printer's ...
Andy App's Installation Guide
Welcome to Andy! This article will help you easily install Andy in your kitchen/s. First of all, it is advisable to take a look at this article: Welcome to Andy! Let's get started! STEPS TO FOLLOW 1. Installing the Andy App on your device. The first ...
Linking your Dobbox sensors to Andy
Trying to link your Dobbox sensors to Andy from Android and iOS? You'll find all the information you need, below. Turning the devices ON 1. Turn on the sensors by holding down the button on the back of the sensor for a few seconds until the blue ...
Accessing the Andy App on Windows using Google Chrome
Please check here the minimum requirements needed to work with the Andy App. On your computer, open the Google Chrome browser. Go to Andy's website: https://my.andyapp.io/ Click on Settings > More Tools > Create Shortcut. This feature allows you to ...