How can I better view my labels?

At Andy we know that your labels can contain a lot of information in a small paper space. That is why, in theTD4550 printer model, we can make an adjustment that will allow us to further define the letter and consequently better visualize all the information contained in the label.

If your labels containa lot of text,small printand/orbarcodeorEAN codeThis adjustment will help you.

This adjustment must be made from the printer by clicking on the buttonMenu. Now we must turn toSettings>Printing density>+5as shown in the picture:

This adjustment allows you to better define the letter by giving it greater density so that it can be read smoothly.

Ready! Now you may be interested inHow to set a printer as default?

Related Articles
Labels printed with Andy are not saved
If you are printing labels and they are not being reflected in the Traceability label history in Andy, it is very likely that Andy is not connecting to the internet. Please note that an internet connection is required for labels to be displayed ...
Labels are badly printed
If the labels are printed incorrectly, you should check two key aspects: Label roll placement To ensure correct label printing, first check how the label roll is positioned. To do so, follow the steps shown in the following video: TD-4550DNBW Print ...
How to calibrate labels on Zebra printers?
If the Zebra printer had previously been used, you may need to calibrate it to ensure that the labels printed are properly aligned. Simply follow these steps: 1. Open the cover and align the sensor. Both arrows should point towards each other. 2. ...
How to resolve printing errors in the Zebra printer?
In this post we'll show you how to resolve any potential connection issues between the printer and the device used to print with Andy. To learn more about pairing the Zebra printer, please read this article. Resetting the Wi-Fi network on the Zebra ...
How can I fix the message of: Template selecc. wrong?
If you encounter the message "Incorrect template selection when printing", don't worry! There's a very simple solution! Go to your Printer's Menu > Template Settings > Template Mode > Off. Once you have turned off Template Mode, go back to Andy and ...