Link Brother TD-2350 printer with Andy via Bluetooth

Link Brother TD-2350 printer with Andy via Bluetooth

The process to link the Brother TD-2350 printer with an Android device is explained below.
InfoBefore starting the process, check this article to find out which printers are approved for labelling with Andy. 
At the moment, this model is not compatible with iOS devices

Activate Bluetooth mode on the printer 
From the printer itself, make sure that Bluetooth mode is enabled.
Complete the following steps to activate it:




Pair the printer with an Android device 

1. Go to Settings > Bluetooth 
2. Search for available devices and select your printer model. 
3. Enter the PIN to link the printer. The PIN is the last 4 digits of the name shown as “TD-4550DNWB_XXXX”. 
AlertIf a name in this format does NOT appear, enter the last 4 digits of the printer’s serial number.                     

Link the Brother printer with Andy 
InfoIf you access the Labelling tool for the first time without setting it up, you will see the message “The printer is not yet configured”. Click on “Let’s do it” and you will be taken to the Printer Settings section.
 From the main menu, go to Settings >  Printer and:

1. Select the printer model you are using

2. From the list of Bluetooth-linked devices, select your printer model. (If your previously linked printer does not appear, check that you have accepted the required permissions. To do this, go to your device’s Settings > Applications > Andy > Permissions > accept all permissions. It is essential to accept the NEARBY DEVICES permission.)

3. Assign a name to the printer (optional)

4. Click on Save




Your printer is now connected to Andy and ready for labelling!