How to install a G-Printer printer in Andy

How to install a G-Printer printer in Andy

How to install a G-Printer printer in Andy

In this guide, you will learn how to install and set up a G-Printer printer in Andy.

G-Printer printers connect via Bluetooth. You only need to pair them once to start printing your labels.

Before you start

Before you start, check the following:

  • You are using Google Chrome or Microsoft Edge.
  • The printer is on and close to the computer or tablet.
  • Bluetooth is turned on on your device.

1. Add the printer

  1. In the left menu, go to Settings.
  2. Select Printer.
  3. Click Add a printer.
Add a printer

2. Choose the model

In 1. Select your printer model, choose GPrinter-2120TF.

Choose the model

3. Pair the printer

  1. In 2. Select the printer via Bluetooth, click Refresh.
  2. The browser opens a window: “my.andyapp.io wants to pair”.
  3. Select your printer. Its name starts with Printer_ and ends with _BLE.
  4. Click Pair.
  5. The printer appears under Nearby printers. Select it.
Pair the printer

4. Save the settings

  1. If needed, change the name in Name of this printer.
  2. Click Save settings.
Save settings

The printer appears under Configured printers, with a Bluetooth connection.

Configured printers

5. Check the installation

  1. In Configured printers, click Print a test.
  2. Check that the test label prints correctly.
Note: once the installation is complete, you can print your labels from Labelling.

Additional information

Select the printer again after reloading the page

On a computer, every time you reload the page, Andy shows the message “The printer is not available. Error: E-501”. You don't need to install the printer again:

E-501 message
  1. Click Check in the message.
  2. In the browser window, select your printer and click Pair.
Select the printer again

The message disappears and you can keep printing.

Note: in the Andy app on tablet or mobile, this step is not needed: the printer stays saved.