How to connect a Rmoni gateway via Wi-Fi

How to connect a Rmoni gateway via Wi-Fi

How to connect a Rmoni gateway via Wi-Fi

In this guide, you will learn how to switch a Rmoni gateway from Ethernet to the customer's Wi-Fi.

You do it from the RmoniWeb app, using Bluetooth.

When you finish, you will be able to check that the gateway is online.

Important: the gateway only works with 2.4 GHz Wi-Fi networks. It is not compatible with 5 GHz networks.

Before you start

This guide is for a gateway that is already installed and will use the customer's Wi-Fi instead of the Ethernet cable.

Check that you have:

  • A smartphone with the RmoniWeb app updated to the latest version (App Store or Google Play), with Bluetooth turned on and signed in to the customer's account.
  • The magnet to activate the gateway's Bluetooth mode.
  • The customer's Wi-Fi network name (SSID) and password.
  • The gateway powered on, within range of the Wi-Fi and of your smartphone.

Connect the gateway to Wi-Fi

  1. In the RmoniWeb app, tap the gear icon (top left) and choose System health.
  2. Tap the gateway in the list. The Gateway information screen appears.
Select the gateway
  1. Tap Advanced settings. The Activate Bluetooth mode screen appears. Briefly hold the magnet over the gateway's QR code until the blue LED turns on.
  2. Tap Connect. The Loading screen appears; it can take up to 1 minute.
Activate Bluetooth mode
  1. On the gateway connectivity screen (Gateway connectivity), switch the selector from Ethernet to WiFi.
  2. Enter the customer's SSID (network name) and password.
Set up the Wi-Fi
  1. Tap Save. The message Connection saved! should appear; tap Continue.
  2. You go back to the previous screen (Advanced settings). Tap Go back (Disconnects Bluetooth): Bluetooth disconnects and the gateway restarts.
Save and finish

Check the connection

When the gateway has restarted, check that it is online:

  1. Look at the green SYSTEM ONLINE LED on the gateway. It should be solid green, not blinking.
  2. In the RmoniWeb app, go to System health and check that the gateway shows as Healthy.

Wi-Fi troubleshooting

  • Bluetooth connection failed: tap Close, briefly hold the magnet over the gateway's QR code again until the blue LED turns on, and tap Connect straight away. Check that Bluetooth is turned on on your phone.
  • Bluetooth disconnects during setup: the connection drops after 5 minutes of inactivity. Activate Bluetooth mode again (step 3).
  • The gateway doesn't connect after Connection saved!: check the SSID and password, and that the network is 2.4 GHz and has internet access. Repeat steps 1 to 8.
  • The gateway doesn't show as Healthy in System health: wait a few minutes and refresh. If the problem continues, check the Wi-Fi coverage where the gateway is.